Peristaltic Pump Filling Machine

BT-600CA Series ≤3000mL/min.

2 Large-screen color LCD graphic display, the numerous basic information and advanced information display on the same screen.

2 Three functions- flow, timing and filling

2 Automatic identification footswitch, filling automatically with infrared sensing

2 RS485 in general MODBUS protocol

FEATURES

2 Large-screen color LCD graphic display, along with three operation- flow , timing and filling

2 Other basic functions-emptying at full speed, suck-back angle setup, flow correction, Beijing time, ambient temperature.

2 Menu: flow (speed display on the screen),timing(operated by appointment),filling(infrared sensing acceptable)

2 Operation instructions: Panel operation, pedal switch (automatic recognition), external control (analog signal and communication protocol)

2 Rotating code switch, convenient and practical, with voice and text prompt, can be operated easily without special training.

2 Applicable pump heads: 153Yx, 253Yx, DGx (connect two pump heads, forming two channels at same flow rate ).

2 Strong corrosion resistance atramentous PPS & good appearance and chemical properties lightly colored PSU material pump heads for selection.

2 Standard configuration: Digital display driver, pump head, tubing(2 meters length)

2 Optional configuration: foot switch, spare hose, filling needle, hose joint, anti floating countersunk head

2 Note: the footswitch control the start and stop in two states-jog and last, the pump automatically identify external footswitch

SPECIFICATION

2 Model No.: BT-600CA

2 Display Mode: Color LCD graphic display

2 Speed: 30～600.0rpm，reversible

2 Speed Control: Rotary encoder switch 

2 Operate Mode: Flow , timing , filling

2 Function: Full speed emptying, suck-back angle settings , flow correction , time adjustment , ambient temperature detection

2 Suck-back angle: 0～360°arbitrarily set

2 Foot switch: Automatic identification ( can be set to inching operation or continuous running)

2 Filling running: Automatic operation program or infrared sensing 

2 Dimension: L304 xW166 xH178(mm), total weight:4.1-5.1Kg 

2 Work environment: -20-60℃, Relative humidity less than 5% 

2 Power supply: AC220V50/60Hz(Ac110V50/60Hz optional), consumed power 54W

2 Max pressure: ≤0.2Mpa，short time up to 0.27Mpa ( hose outlet pressure ) 

2 Control Mode: Start and stop , direction , and speed control:0.5-5V/10V、4-20mA、0-10KHz；RS485 in MODBUS protocol

2 Protection grade: IP31