BT-600CA Series ≤3000mL/min.
Large-screen color LCD graphic display, the numerous basic information and advanced information display on the same screen.
Three functions- flow, timing and filling
Automatic identification footswitch, filling automatically with infrared sensing
RS485 in general MODBUS protocol
FEATURES
Large-screen color LCD graphic display, along with three operation- flow , timing and filling
Other basic functions-emptying at full speed, suck-back angle setup, flow correction, Beijing time, ambient temperature.
Menu: flow (speed display on the screen),timing(operated by appointment),filling(infrared sensing acceptable)
Operation instructions: Panel operation, pedal switch (automatic recognition), external control (analog signal and communication protocol)
Rotating code switch, convenient and practical, with voice and text prompt, can be operated easily without special training.
Applicable pump heads: 153Yx, 253Yx, DGx (connect two pump heads, forming two channels at same flow rate ).
Strong corrosion resistance atramentous PPS & good appearance and chemical properties lightly colored PSU material pump heads for selection.
Standard configuration: Digital display driver, pump head, tubing(2 meters length)
Optional configuration: foot switch, spare hose, filling needle, hose joint, anti floating countersunk head
Note: the footswitch control the start and stop in two states-jog and last, the pump automatically identify external footswitch
SPECIFICATION
Model No.: BT-600CA
Display Mode: Color LCD graphic display
Speed: 30~600.0rpm,reversible
Speed Control: Rotary encoder switch
Operate Mode: Flow , timing , filling
Function: Full speed emptying, suck-back angle settings , flow correction , time adjustment , ambient temperature detection
Suck-back angle: 0~360°arbitrarily set
Foot switch: Automatic identification ( can be set to inching operation or continuous running)
Filling running: Automatic operation program or infrared sensing
Dimension: L304 xW166 xH178(mm), total weight:4.1-5.1Kg
Work environment: -20-60℃, Relative humidity less than 5%
Power supply: AC220V50/60Hz(Ac110V50/60Hz optional), consumed power 54W
Max pressure: ≤0.2Mpa,short time up to 0.27Mpa ( hose outlet pressure )
Control Mode: Start and stop , direction , and speed control:0.5-5V/10V、4-20mA、0-10KHz;RS485 in MODBUS protocol
Protection grade: IP31